• Industrial Winch _3
  • Industrial Winch _4
  • Industrial Winch
  • Industrial Winch _ banner 2
  • Industrial Winch _ banner 4
Products
Products
Rhino 15 Pro
Rhino 15 Pro
6.8 Tonnes Electric Recovery Winch
  • Reliable electric winch for commercial, industrial and severe duty applications
  • 5,250w/24V series wound motor.
  • 10 equally positioned pin holes with a ergonomic T-handle make it possible to reposition in 36 degree increments.
  • Patented over-loading current protector can be programmed by the winch specification and pulling requirements which limits the winch’s maximum pulling power
  • LED Indicator displays detailed winch status while operating.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping.
  • Easy to turn the T-handle for rapid wire rope payout.
  • Submersible sealed contactor handles high amps and allows higher duty cycle.
  • Meets CE Machinery Directive 2006/42/EC, and EN 14492-1 standards
Specification/Part Numbers
  • Part number: PN 855126 (24V)
  • Rated line pull: 6,804 kg / 15,000 lb single line (EN 14492-1 rating)
  • Motor: 5,250 w / 7.0 hp 24V series wound
  • Gear train: 3-stage planetary 315:1
  • Clutch (freespooling): Rotating ring gear                             
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure) 
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 133 x 195.5 mm ( 5.2” x 7.7” )
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
  • Mounting bolts pattern: 254 x 114.3 mm (10” x 4.5”) ;  254 x 165.1 mm (10" x 6.5")
  • Wire rope recommended: 14 mm x 22 m, 1,960N/mm2 grade with a minimum breaking strength of 137 KN required for EN 14492-1 rating
  • Winch weight (including rope) : 59 kg / 130 lb
  • Gross weight : 72 kg / 159 lb
  • Box dimension, (L x D x H) : 693 x 354 x 473 mm (27.3” x 13.9” x 18.6”)

    Compliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Line Speed and Amp. Draw (1st layer of wire rope on the drum): 

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp. Draw, A 
24V
No Load
12.6 / 41.3
35
1,814 / 4,000
5.1 / 16.7
80
3,630 / 8,000
4.1 / 13.5
160
4,535 / 10,000
3.1 / 10.2
200
5,440 / 12,000
2.5 / 8.2
250
6,804 / 15,000
1.9 / 6.2
300

Line Pull and Rope Capacity:

Layer of Rope
Pull by Layer,
kg / lb
Line Speed,
mpm / fpm
Total Rope on the Drum,
m / ft
1st
6,804 / 15,000
 1.9 / 6.2
6.2 / 20.3
2nd
5,715 / 12,599
2.3 / 7.5
13.6 / 44.6
3rd
4,927 / 10,862
 2.6 / 8.5
22 / 72

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
 
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessory
    • Roller fairlead
    • Remote control w/5 m (17’) cord
    • Detachable control box
  • Cable tensioner
  • Current Regulator

Download
  • Rhino 15 Pro Operation Manual
  • 2020-01-07
  • PDF, 0.21 MB
  • Download
 
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.  
  COMEUP is registered trademark of COMEUP INDUSTRIES INC.  Specifications are subject to change without prior notice.