• Industrial Winch _3
  • Industrial Winch _4
  • Industrial Winch
  • Industrial Winch _ banner 2
  • Industrial Winch _ banner 4
Products
Products
Rhino 8 Pro
Rhino 8 Pro

3.5 Tonnes Electric Recovery Winch

  • Reliable electric winch for commercial, industrial and severe duty applications
  • 3,430w/12V or 1,940w/24V series wound motor.
  • Patented over-loading current protector can be programmed by the winch specification and pulling requirements which limits the winch’s maximum pulling power.
  • LED Indicator displays detailed winch status while operating.
  • Low voltage detecting function reminds operator vehicle battery status.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping
  • Submersible sealed contactor handles high amps and allows higher duty cycle. 
  • Meets SAE J706, CE Machinery Directive 2006/42/EC, and EN 14492-1 standards

What's News Link: KAIZEN: Rhino Pro Series Electric Recovery Winches

Specification/Part Numbers
  • Part number: PN 850318 (12V) / PN 850326 (24V)
  • Rated line pull: 3,630 kg / 8,000 lb single line (SAE J706 rating)
                                3,560 kg (EN 14492-1 rating) 
  • Motor: 3,430 w / 4.6 hp 12V series wound
                 1,940 w / 2.6 hp 24V series wound
  • Gear train: 3-stage planetary 211:1
  • Clutch (freespooling): Rotating ring gear                             
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure) 
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 90 x 205 mm (3.5” x 8.1")
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
                                              254 x 165 mm (10" x 6.5")
  • Wire rope recommended: 
    * 10 mm x 22.6 m, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
    * 3/8" x 100', EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
  • Winch weight (including rope) : 31 kg / 68.3 lb
  • Gross weight : 47 kg / 104 lb
  • Box dimension, (L x D x H) : 650 x 260 x 440 mm (25.6" x 10.2" x 17.3")

    Compliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Line Speed and Amp. Draw (1st layer of wire rope on the drum): 

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp. Draw, A 
12V
24V
No Load
9.0 / 29.5
45
 30
907 / 2,000
3 .0 / 10.0
90
60
1,814 / 4,000
1.5 / 5.0
180
120
2,722 / 6,000
1.0 / 3.3
260
180
3,630 / 8,000
0.7 / 2.3
340
230

Line Pull and Rope Capacity:

Layer of Rope
Pull by Layer,
kg / lb
Line Speed,
mpm / fpm
Total Rope on the Drum,
m / ft
1st
3,630 / 8,000
0.7 / 2.3
6.3 / 20.7
2nd
3,025 / 6,669
0.9 / 3.0
13.8 / 45.3
3rd
2,593 / 5,717
1.0 / 3.3
22.6 / 74.1
4th
2,269 / 5,002
1.2 / 4.0
30.5 / 100

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase. 

Dimension, mm/in:

Accessory:

Standard Accessories Option Accessory
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Cable tensioner
  • Current Regulator

Download
  • Rhino 8 Pro Operation Manual
  • 2020-01-07
  • PDF, 0.18 MB
  • Download
 
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.  
  COMEUP is registered trademark of COMEUP INDUSTRIES INC.  Specifications are subject to change without prior notice.