• Defence & Security Winch
  • Automotive Winch_b04
Products
Products
Walrus 22.0
Walrus 22.0
  • 24V DC severe duty winch rated at 22.000 lb
  • Waterproof and dustproof construction:
    - Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water.
    - Rubber seals at motor and gear housing joints for independent water protection
    - Double lip and spring seal at drum support racks
    - Industrial duty remote control with twist-on connector to provide total protection from water.
  • Waterproof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
  • Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
  • Corrosion resistance 720hr.
  • Meet international standards of CE Machinery Directive 2006/42/CE, CE Electromagnetic Compatibility Directive 2004/108/EC, and SAE J706 Surface Vehicle standard 2003-08 rev.
Specification/Part Numbers
  • Part Number:PN 282210 (24V)
  • Rated line pull: 9,980 kg / 22,000 lb (single line)
  • Line speed ( 1st layer): 9.0 mpm / 29.5 fpm 30 A at 24V no load
                                            1.4 mpm / 4.6 fpm 330 A at 24V full load
  • Motor: 5,250 w / 7.0 hp 24V series wound 
  • Gear train: 3-stage planetary 343:1
  • Clutch (freespooling): Rotating ring gear                       
  • Brake (outside the drum): Automatic, full load  CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size:102 mm x 254 mm (4” x 10”)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
  • Rope type: 6 × 29 - IWRC. (Breaking strength 126.4 kN)
  • Rope size: 12.7 mm x 25 m (1/2” x 82’)
  • Mounting bolts pattern: 304 mm x 114.3 mm (12” x 4.5”)
                                               304 mm x 165 mm (12" x 6.5")
  • Mounting: Foot forward mounting only
  • Winch weight (including rope) : 80 kg / 176.4 lb
  • Gross weight : 86.1 kg / 189.8 lb
  • Box dimension  : 745 x 275 x 430 mm (29.3" x 10.8" x 16.9")

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp. Draw,  A 
24V
No load
9.0 / 29.5
30A
2,268 / 5,000
3.2 / 10.5
100A
4,536 / 10,000
2.5 / 8.2
160A
6,804 / 15,000
2.0 / 6.6
240A
9,980 / 22,000
1.4 / 4.6
330A

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
9,980 / 22,000
7.0 / 23.0
2nd
8,171 / 18,014
15.5 / 50.9
3rd
6,917 / 15,249
25.0 / 82.0

Warning  

•The winch is not intended to be used in any manner for the movement or lifting of personnel. 
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components, 
                               One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
 

Dimension, mm/in:

 Accessory:

Standard Accessories:
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Wire rope w/clevis hook
  • Cable tensioner
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap

Download
  • Walrus 22.0 Operation Manual
  • 2017-08-03
  • PDF, 1.03 MB
  • Download
 
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.  
  COMEUP is registered trademark of COMEUP INDUSTRIES INC.  Specifications are subject to change without prior notice.