Products
Products
Seal Gen2 12.5
Seal Gen2 12.5
  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion.The greater the load on the rope, the greater amount of braking is generated by the mechanism.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
    (* Only foot forward mounting can meet SAE J706)
Specification/Part Numbers
  • Part number: PN 295730
  • Rated line pull: 5,670 kg / 12,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 225:1
  • Clutch (freespooling): Rotating ring gear                             
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure) 
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7")
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
  • Rope type: Galvanized aircraft A7 x19 wire rope
  • Rope size: 9.5 mm x 25 m (3/8” x 82’)
  • Mounting bolt pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting: Foot forward mounting only
  • Finish: Matte black powder-coated 
  • Winch weight (including rope) : 37.7 kg / 83.1 lb
  • Gross weight : 53 kg / 117 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9" x 8.2" x 16.9")

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A 
12V
No load
7.5 / 24.6
45
907 / 2,000
3.4 / 11.2
75
1,814 / 4,000
2.5 / 8.2
160
2,722 / 6,000
2.0 / 6.6
230
3,629 / 8,000
1.6 / 5.2
300
5,670 / 12,500
0.9 / 3.0
470

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,670 / 12,500
5.4 / 17.7
2nd
4,499 / 9,919
12.1 / 39.7
3rd
3,729 / 8,221
20.3 / 66.6
4th
3,184 / 7,020
25.0 / 82.0

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components, 
                                New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

 

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.

Accessories:

Standard Accessories  Option Accessories
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Wire rope w/safety hook 
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap 
 
  • Winch accessory kit

Download
  • Seal Gen2 12.5 Operation Manual
  • 2017-01-25
  • PDF, 0.27 MB
  • Download
 
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.  
  COMEUP is registered trademark of COMEUP INDUSTRIES INC.  Specifications are subject to change without prior notice.