• AC Winch Banner_3
  • AC Winch Banner_2
  • AC Winch Banner_3
  • AC Winch
Products
Products
WT-180
WT-180
  • Lightweight and compact design for wind energy turbines for efficient and economical operation at great heights
  • A standard lifting height of up to 100 meters and high lifting speed are perfect guarantee efficient operation.
  • Extreme high duty cycle 40%ED, 2m FEM classification, 240 times of start per hour
  • Emergency stop and up and down limits functions come as standard
  • 24 VAC control for safety operation
  • All electric components, up and down limits protection, and brake are compliant to CE and VED requirements
Specification/Part Numbers
  • Lifting capacity: 180 kg at wire rope top layer
  • FEM classification: 2 m, 240 times starts/per hour, 40% duty cycle
  • Power source: 50Hz, 3 phase, 380/400/415/440V
  • Lifting speed: 17 – 23 m/min
  • Motor: 0.75 kw x 4 poles induction brake motor at IP 55 and F class ratings 
  • Gear ratio: 2 stages planetary gear, 36:1
  • Maximum lifting height: 98 m
  • Brake (Integrated in motor): 230V DC electromagnetic failsafe brake
  • Drum length: 185 mm
  • Drum dia.: 120 mm
  • Drum flange dia.: 185 mm
  • Control: 24 VDC low voltage control
  • Remote control: An emergency stop switch and 3 meter cord
  • Limits protection: Up and Down limits protection
  • Wire rope: 5 mm x 100 m untwisted w/weight hook
  • Mounting bolts pattern: 350 mm x 220 mm
  • Net weight, kg (standard version) : 55 kg
  • Gross weight : 60 kg
  • Body dimension, (L x D x H) : 696 x 463.5 x 284.5 mm
  • Box dimension, (L x D x H) : 728 x 498 x 304 mm

    Compliant with EN 14492-2 requirements for hoisting application:
    The working coefficient for the first rope layer on the drum shall be at least 5.
    The D/d ratio to the center of the rope shall be at least 15 for the drum.
    A switch with an emergency stop and limits functions are requested
    Low voltage control is requested 


 Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
252
17
14.5
2nd
233.3
18.3
30.2
3rd
217.2
19.7
 47.1
4th
203.2
21
 65.1
5rd
190.2
22.4
 84.3
6th
180
23
 100

Note:
1.Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%

Warning 
The winch is not intended to be used in any manner for the movement or lifting of personnel. 
The rated lifting capacity shown is based on the top rope layer on the drum 
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase. 
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
 
Dimension, mm/in:

Accessory:

Standard Accessories
  • Wire rope 5 mm x 100 m untwisted
  • Weight hook w/safety latch, CHW-0033
  • Suspension plate
  • Low voltage control ass'y LV-320
    - Remote Control, PB-306
      * Switch cord 1.25 mm2 x 3C x 3m 
      * Pendant switch PB-306 w/an emergency stop button
    - Low voltage control, LV-320    

Download
  • WT-180 Operation Manual
  • 2013-08-07
  • PDF, 0.24 MB
  • Download
 
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.  
  COMEUP is registered trademark of COMEUP INDUSTRIES INC.  Specifications are subject to change without prior notice.